Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If windows with double glazed window repairs panes are joined by internal beading, it will be harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall on the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap is large, you might be interested in the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, window repairs near me draughts, and even security. It's crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need to open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and check for fitting. If you're happy with the fit, tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may need to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC Window Repairs Near Me is difficult to open, or if it opens in the breeze. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is an easy process but it can be simpler when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to improper installation in the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges can also become disaligned as a result of wear, causing a gap where the sash and frame meet. They can be repaired by giving them good clean, but if they are beyond repair it might be necessary to get them re-aligned or replaced. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it's possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it's best to seek professional assistance immediately.